MWHS
Modular Water Heating System
Packaged direct and indirect water heating, without the losses of a sparge pipe.
01Application
Traditionally a sparge pipe is used whenever steam is required to be directly purged into water for heating. This gives rise to two kinds of challenges. In indirect heating the steam does not come in direct contact with the water to be heated, which prevents contamination of the water due to steam mixing as in the case of direct heating. It is widely used in industry because it provides rapid, even heating, using a heat exchanger — either PHE or shell & tube type — to heat the water.
02What it does
- Direct heating drawback: high noise due to vibration as steam leaves a number of small holes at high velocity.
- Direct heating drawback: a sizeable percentage of the steam escapes and is wasted without condensing into the process fluid.
Sizing this for a line?
Send the pressure, the pipe size and what the equipment is doing. We will come back with the application.
Enquire about Modular Water Heating System→03Related in this family
Y / T-TYPE STRAINER
MAINTENO Tigon
A Y/T-type strainer that is cleaned online — no opening up, no shutdown.
BS
Basket Strainer
Outside-to-inside flow design so collected solids drain out without pulling the basket.
DOUBLE WINDOW SIGHT GLASS
MULTIVIEW
A cap-nut sight glass that keeps the glass pre-stress free, so it lasts.
